5.2 Pre-set armrests
Flip back armrests / Single Post Removable armrests width
(Fig 5.
5
)
Fine adjustments can be done with the armrest only, for larger
adjustments also pre-set the seat plate width.
1.
Loosen (A) by one turn.
2.
Adjust (B) to the desired position
3.
Tighten (A).
See page 3
8
for specified torque values.
CAUTION!
• Please check that the new armrest position does not
interfere with any seat positioning
Reclining flip back armrest width (Fig 5.
6
)
1.
Loosen (A) by one turn.
2.
Adjust (B) to the desired position
3.
Tighten (A).
See page 3
8
for specified torque values.
CAUTION!
• Please check that the new armrest position does not
interfere with any seat positioning
Seat plate width (Fig 5.
7)
Lift the seat cushion off the Velcro© strips to access the
seat plates.
1.
Loosen (A) by one turn.
2.
Adjust (B) to the desired position
3.
Tighten (A).
See page 3
8
for specified torque values.
The seat width is indicated by the scale that runs alongside
each slot (B).
Fig. 5.
5
Fig. 5.
6
Fig. 5.
7
B
B
A
B
A
1
2
3
B
248020 Rev. C
14
SEDEO PRO
