RGBW Wall Mounted Touch ZigBee Remote Controller
09.ZG2TU.04782
Function introduction
Important:
Read All Instructions Prior to Installation
Front side
Back side
19.4 mm
43.58 mm
6
5
.5
8 m
m
AC Power input
L
L
8
3
.0
0 m
m
ZigBee controller
N
N
AC POWER INPUT
Product Data
Transmission Range
(free field)
30m
Operating temperature
0-40°C
Relative humidity
8% to 80%
Dimming Range
0.1%-100%
Power Supply
100-240V AC
Operation Frequency
2.4GHz
Dimensions
120x75x29.1mm
Protection Type
Ip20
Red channel:Click to turn off/on
Press and hold down to increase/
decrease light intensity
Blue channel:Click to turn off/on
Press and hold down to increase/
decrease light intensity
Green channel:Click to turn off/on
Press and hold down to increase/
decrease light intensity
Click to get white color mixed by R,
G, B channels
RGB color wheel, slide touch to
select RGB color
ON/OFF button, click to turn
ON/OFF all, press and hold down to
search and pair to ZigBee network
or factory reset the controller
Press and hold down to
increase/decrease light intensity
Click to select warm white, cool
white, natural white mixed by RGB
Play/Pause button, click to play
or pause built-in running effects,
press and hold down to speed
up/down the effect
Group button, click to select
corresponding group, press and
hold down to turn ON/OFF it
Note: This remote supports 3
groups for binding max. 30
lighting devices.
•
DO NOT install with power applied to the device.
•
DO NOT expose the device to moisture.
Safety & Warnings
• ZigBee RGBW remote based on ZigBee 3.0
• Full touch glass interface, smooth RGB color and light intensity control
• Enables to pair ZigBee lighting devices via touchlink commissioning without coordinator
• Supports find and bind mode to pair with ZigBee lighting devices
• Supports 3 groups for binding lighting devices
• 2.4 GHz global operation
• Transmission range up to 30m
• Compatible with universal ZigBee Gateway products
• Compatible with universal RGBW ZigBee lighting devices
Operation
1.This ZigBee RGB remote is a wireless transmitter that communicates with a variety of ZigBee
compatible systems. This transmitter sends wireless radio signals that are used to remotely control a
compatible system.
2.This ZigBee remote supports 3 groups for binding max. 30 lighting devices and enables to control
RGB ZigBee lighting devices.
3.ZigBee Network Pairing Through ZigBee Coordinator (Add to ZigBee Network)
1)Before pairing, please make sure that the remote does not belong to any ZigBee network. If yes, please first
remove it from the network, otherwise network pairing will fail.
2)From your ZigBee Controller or hub interface, choose to add device and enter Locating/Pairing mode (Add
