L
N
pu
sh
sw
itc
h
L
L
N
N
OUT
L
N
A1-A2: 8-230V
AC 100-240V
Reset
pu
sh
sw
itc
h
L
L
N
N
OUT
L
N
A1-A2: 8-230V
AC 100-240V
Reset
11. Setup a Zigbee Network & Add Other Devices to the Network (No Coordinator Required)
Step 1
: Short press “Reset.”
button 4 times (Or reset
power of the device 4 times)
to enable the device to setup
a zigbee network (connected
light flashes twice) to
discover and add other
devices, 180 seconds
timeout, repeat this step.
Zigbee
Remote
Step 2
: Set another device or remote or touch panel into network pairing mode and pair to the network, refer to
their manuals
.
Step 3
: Pair more devices and remotes to the network as you would like, refer to their manuals.
Step 4
: Bind the added devices and remotes through Touchlink so that the devices can be controlled by the
remotes, refer to their manuals.
< 10cm
TouchLink
10. Delete Learning to a Zigbee Green Power Remote
Step 1
: Short press “Reset.”
button 3 times (Or reset
power of the device 3 times)
to start delete Learning mode
(connected light flashes
slowly), 180 seconds timeout,
repeat this step.
Zigbee
Green Power
Remote
Step 2:
Set the paired green
power remote into Learning
mode, please refer to its manual
.
Step 3
: Connected light will
flash 4 times to indicate
successful deleting.
Note: 1) Each added device can link and be controlled by max. 30 added remotes.
2) Each added remote can link and control max. 30 added devices.
12. OTA
The device supports firmware updating through OTA, and will acquire new firmware from zigbee controller or
hub every 10 minutes automatically.
Wiring Diagram
PUSH
L
N
Notes for the diagrams:
L
- terminal for live lead
N
- terminal for neutral lead
Out
- output terminal of the device (controlling connected light source)
+A1
- terminal for push switch
-A2
- terminal for grounding to the push switch connected to the device
pu
sh
sw
itc
h
L
L
N
N
OUT
A1-A2: 8-230V
AC 100-240V
Reset
L
N
pu
sh
sw
itc
h
L
L
N
N
OUT
L
N
A1-A2: 8-230V
AC 100-240V
Reset
1) With Single Push Switch
PUSH
L
N
PUSH
2) With Multiple Push Switches for Multiple Control Points
pu
sh
sw
itc
h
L
L
N
N
OUT
A1-A2: 8-230V
AC 100-240V
Reset
