RF Single Color Remote Controller
09.02802.04111
Note:Before the first use, please remove the protective film on the battery.
Function introduction
Important:
Read All Instructions Prior to Installation
Output
RF signal
Operation Frequency
868/915/434MHz
Operating temperature
0-40°C
Relative humidity
8% to 80%
Dimensions
136.3x38.9x10.7mm
Front side
Back side
•
Control 10 zones of receivers separately
• Single color controller
• Compatible with all universal series RF receivers
• 1 receiver can be paired by max 8 different remote controls.
• Waterproof grade: IP20
Product Data
•
This device contains a button lithium battery that shall be stored and disposed properly.
•
DO NOT expose the device to moisture.
Safety & Warnings
Power Supply
3V(1xCR2025 battery)
Click to turn on/off,
Press and hold down to increase/
decrease light intensity
1
2
3
4
5
6
7
8
9
10
Each button controls one zone of
receiver separately
Pair with RF receiver
Step 3:
Choose one zone and click of the zone(
e.g.
zone
10
),
LED lights connected with the RF receiver flicker once means the receiver is
paired with zone 10 successfully.
Step 2:
Click the “
Learning Key
” button on RF receiver to set it into pairing status
Note: one receiver can be paired with max 8 remote controls.
Learning
Key
RF LED Receiver
Step 1:
Do wiring the RF receiver according to wiring diagram(please refer to the
instruction of RF receiver that you would like to pair with.
After pairing
,
click
or
hold of 1/2/3/4/5/6/7/8/9/10 to control each zone separately
1
2
3
4
5
6
7
8
9
10
