Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
5-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Choose channel
Hold the “Mode” and”Bright”button for two seconds, cH digital display flashes,then press “Speed”
button to choose”3”or “4”,then press any button for 2 seconds to confirm 3 or 4 channels you
need.
Speed button
To speed up/down color changing,0-9 speed level cycling changing,”0”is the maximum speed,
“9”is the minimum speed. The “Speed” button is only used under dynamic effects which you can
get from “Mode” button.
Mode button
Press “Mode” button to see total 9 dynamic effects in this way: effects1-pause-effects2-pause-
effects3-pause...
Bright button
To adjust the brightness,1-8 level brightness, cycling,”1”is the lowest brightness,”8”is the highest
brightness.
Set DMX address
Press 1st button for 2 seconds, digital display flashes to set the required DMX address, then press any button
for >2 seconds to confirm.
Choose PWM frequency
Press 1st button and 3rd button for 2 seconds, digital display flashes to show
P-c
.
P means PWM frequency, press 1st to show "1", means 1500Hz, "2" means 200Hz.
c means dimming options, press 3rd to show "1", means logarithmic dimming, "2" means linear dimming.
The factory preset default is PWM frequency 200Hz with linear dimming.
2-2
“1" button
“2" button
“3" button
Only under “ru1” stand-alone mode
