DMX512 Decoder(with Stand-Alone)
Standard DMX512 compliant control interface, enable to set the DMX
address freely.And show address Via digital numueric display.
Stand-alone mode and DMX512 decoder mode can be freely switched
by buttons.Under situation of Stand-alone mode, it can be controlled
by manual buttons with its built-in programs, instead of DMX signal.
SR-2103DIN
Three-channel/ four-channel output selectable.
Wiring diagram
Product Size
Two types available(Constant Voltage, Constant Current),suitable for
different LED lamps.
To work with power repeater to expand output power unlimitedly.
Operation of switching 3 or 4 channels
Through buttons to set desired DMX512 address, 1 key is to set “hundreds” position, 2 is to set “ten” position, 3
is to set “one” bit.
“1" button
“2" button
“3" button
To open the connection of DMX512 controller, then it can work correctly.
Using instruction
Choose Channel
Press button" 2 "and button" 3" at the same time for 2 seconds, cH digital display flashes, press button”1" to choose
3 means total 3 channels, 4 means total 4 channels. Press any button for 2 seconds to confirm 3 or 4 channels outputs.
The factory preset default is 4 channels outputs.
3/4,
Compatible
with SR-2811DMX,SR-2201DMX,SR-2812,SR-2816 and
any good quality DMX Master
Parameter
SR-2103DIN
12-36VDC
4x5A
4x(60-180)W
constant voltage
98.0
65.0
105.5
53.0
Power Supply
12-36VDC
L
N 1
10V
-230V
AC
SR-2103DIN
D-
GND
D+
D-
D+
0-9
0-5
0-9
DMX512
Decoder
V-
V+
+
R-
G-
B-
W-
Power input
DMX Master
RGB/W or CDW LED strip
Set DMX address
Press 1st button for 2 seconds, digital display flashes to set the required DMX address, then press any button
for >2 seconds to confirm.
Choose PWM frequency
Press 1st button and 3rd button for 2 seconds, digital display flashes to show
P-c
.
P means PWM frequency, press 1st to show "1", means 1500Hz, "2" means 200Hz.
c means dimming options, press 3rd to show "1", means logarithmic dimming, "2" means linear dimming.
The factory preset default is PWM frequency 200Hz with linear dimming.
2-2
Part No.
Input Voltage
Output Power
Output Current
Remarks
ISO9001
：
2008
5
