d. music
LED lighting will move
according the voice
decibel nearby. Bigger
decibel, faster speed.
LED lighting will back to
adjusted speed when no
voice effect.
LED lighting will move
according the level of
music voice. Bigger
decibel, faster speed.
LED lighting will back to
adjusted speed when no
voice effect.
When choose ,it will open your local music palyer(P34,P35)
P33
Voice Sensitivity
The highest,a low voice
will affect the moving
speed lowest
The lowest,need a high
voice affect moving speed.
e. RGB/CDW brightness level line
This button exist in RGB/CDW interface, they are similar, so
here will take RGB as an example to explain.
1)Short press the button
2)Brightness level can be adjusted
from 0-255 to an accurate color.
P36
13
Attention
Before adjust the color by color line, LED might in already in
an existing color, so we need zero clearing each channel first:
moving each channel in any level between 1-225, then move it
back to zero, then RGB lighting will off which means zero
clearing successfully.
f. W button
This button only exists in RGB channels color wheel interface to
adjust W channel brightness independently.
P37
100% brightness
1% brightness
Long press W button to ON/OFF W channel independently.
W channel’s
brightness level
g. Brightness button
Brightness button exist in RGB, CDW and CCT color wheel
interface.
P38
In RGB color wheel interface, it
only adjusts R, G and B three
channels brightness, and cannot
adjusts W channel. We need use
W button to adjust W channel
brightness independently.
In CDW and CCT color wheel interface, it adjusts all channels
brightness.
100% brightness
1% brightness
14
h. Save button
1.Save
1)Select rooms/zones
2)Select color or moving modes
3)Short press save button
4)Long press any button of ,(S2 for example)
5)LED lighting will flash indicate save successfully.
2.Recall
1)Select rooms/zones
2)Short press save button
3)short press saved button in ,(S2 for example)
4)LED will indicate saved color or moving modes
15
