MN2000000225
Page 6
Chapter 2: Getting Started
2.1 Hardware Installation
1.
Turn off the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCIe slot.
4.
To install the card, carefully align the card’s bus connector with the
selected PCIe slot on the motherboard. Push the board down firmly.
5.
Replace the slot bracket’s holding screw to secure the card.
6.
Secure the computer cover and reconnect the power cord.
Power for the Powered RS-232 DB9 connectors are supplied from 4-pin
connector located on the PCB. this connectors allows a PC CD-ROM
type power supply connector to provide the higher currents required by
the power peripherals.
In order to get efficient intake current output, there is one set of 4-pin
power connector designed on the board. The 4-pin power set draws both
+12VDC and +5VDC power output for powered RS-232 device using.
