www.sunred.nl
Please read these instructions carefully before using your new halogen heater
Unpack the halogen heater making sure that all the items are present and that there are no components left in
the box and that the heater head is free from any packing material.
Using the detailed drawing follow the steps to assemble your halogen heater.
Do not connect the halogen heater to the electrical supply until all the assembly is complete.
Do not connect the halogen heater to the electrical supply if any of the components or the power cord is
damaged in any way. If in doubt contact your supplier.
Caution
Only use the halogen heater on a firm solid horizontal area where all the feet on the base are in contact with the floor.
(Should the heater be tilted or fall over the auto cut off
switch will activate)
1. Site the heater outside or in a large open area and well away from any obstructions such as branches or
where the heater is near any objects that can be effected by heat, such as furniture, curtains or other
inflammable objects (minimum distance 1 meter).
2. Do not use near bath tubs, wash areas or swimming pools.
3. Do not use in unventilated areas
4. Do not use where gas, petrol, paint or other inflammable goods are stored.
5. Do not push any items through, obstruct or cover the grill of the heater head.
6. Do not position immediately above or below an electrical socket.
7. Do not move when connected to an electrical supply and always wait for the patio heater to cool down before
storing away.
8. Do not touch the heater head when in use.
9. Do not leave turned on and unattended especially when children and or animals are in the vicinity.
10. The indication of the different positions of switches shall be visible from a distance of 1M.
11. The Marking concerning covering shall be visible after the heater has been installed. It shall not be placed on
the back of portableheaters.
12. The unit must be placed with the clearance of 100cm to the wall and 30cm to the ceiling.
13. The unit must be correctly installed according to the instructions. Make sure the head is at least 1.8m from the
floor.
14. The unit must be securely placed on a horizontal and flat surface.
15. The unit is at high temperature during operation. It keeps hot for a period after shut down. Potential danger
would occur when touching it during this period.
16.
Don’t place the unit closed to curtain and/or other flammable objects. Otherwise there will be a danger of
catching fire.
17.
Don’t cover the unit with anything during operation or a short time after it’s shut down.
18.
Don’t wrap the power supply cord on the unit.
19. The unit must be handled with care, and avoid vibration or hitting.
20. The unit must be securely grounded during operation.
21. If the unit gets damaged, it must be repaired by professional electricians.
22. When the power supply cord is damaged, it must be replaced by authorized agent or other professional
people to avoid danger.
23. The unit must not be positioned under a socket.
24. When assembling, keep clear from any board or flammable material.
25.
The unit must be supervised by adults if it’s used by a child.
26. It is not safe to install the unit by a swimming pool, in a bathroom or shower area.
27. The unit is for household use only. It is not safe to use on a building site, greenhouse, barn or stable where
there’s flammable dust.
28. The head of the unit is at high temperature during operation. Unplug the unit and wait till it cools before
cleaning.
29.
Don’t use this unit in place where causticity or volatile air exists, i.e. dust, steam, gas, etc.
30.
Don’t use this unit as a cloth drier or towel drier.
31.
Don’t use this unit as a sauna heater.
32.
Don’t use this unit as a room heater.
33.
Don’t use this unit in place of animal propagating and raising.
34.
Don’t immerse this unit into water for cleaning.
35. The unit should be plugged in a socket, which is easily visible and reachable.
36. Two Dark points may exist on the surface of the heating elements during the first few minutes after it is turned
on. This is normal, and will not affect the performance of the unit.
37. A tilt switch is fitted inside the unit for safety purpose
