SunPower
Corporation
Document
#
001
‐
69178
Rev**
3
IMPORTANT SAFETY INSTRUCTIONS
This product has been engineered and manufactured to ensure your personal safety. Improper
use may result in potential electrical shock or burns. Please read and follow all instructions for
installation, use and servicing of this product.
Note: A locking tab has been designed into the SPR-5200 and SPR- 4600. It is the sole
responsibility of the end user to provide a locking mechanism that utilizes the tab, and
permanently secures the cover on the inverter.
SAVE THESE INSTRUCTIONS –
This manual contains important instructions for the
SunPower Inverter model numbers SPR-5200 and SPR-4600 that must be followed during
installation and maintenance of the SunPower Inverter.
CAUTION:
♦
All electrical installations should be done in accordance with local electrical codes and the
National Electrical Code (NEC), ANSI/NFPA 70.
♦
Before connecting the SunPower Inverter to the electrical utility grid, approval must be granted
by your utility company. Only qualified electricians should make the connection.
♦
When exposed to light, PV-arrays create electrical energy that could cause a hazardous condition.
To avoid this, completely cover the surface of all PV-arrays with opaque (dark) material before
wiring them.
♦
The SunPower Inverter contains no user-serviceable parts. Refer servicing to qualified service
personnel.
♦
Do not touch the heat sink located at the top of the SunPower Inverter. Temperatures can exceed
158 degrees (70° C).
Please read all safety warnings and instructions before beginning the
installation or operation of the SunPower Inverter.
