22
Problems
Possible Cause
Possible Solution
Machine refuses
to start
•Power failure/machine
not plugged into a
working receptacle.
•Defective socket.
•Fuse has blown.
•Defective extension
cord.
• Check to make sure machine
is plugged into a working outlet.
Try a different outlet.
• Replace fuse. Switch off any
other machines that are
using the same circuit.
• Try the unit without an
extension cord
Fluctuating pressure
• Pump sucking air.
• Valves dirty, worn out,
or stuck.
• Pump seals worn out.
• Check the hoses and
connections are airtight.
• Clean or replace
valves/seals.
•Please contact our customer
service
Machine stops
Fuse has blown.
• Incorrect mains
voltage.
• Thermal sensor
activated.
• Nozzle partially
blocked.
• Replace fuse. Switch off
other machines using
the same circuit.
• Check that the mains
voltage corresponds to
specification on the
model tag.
• Leave the washer for 5
minutes to cool down.
• Clean the nozzle.
1.Disconnect the unit from the electrical power supply
before carrying out maintenance on the machine or
when checking that its parts are in proper working order.
2.To avoid unnecessary hassles, consult the following
table before contacting customer service with any
mechanical issues
Troubleshooting
NOTE:
If the problem cannot be solved, please send the
video or picture of the problem to our mail:
We will help solve
the problem.
