READ ALL SAFETY INSTRUCTIONS BEFORE USE.
To avoid possible electric shock, special care should be taken since
water is employed in the use of aquarium equipment.
◎ The appliance should be mounted on a fish tank with a suitable drain or water intercep
tion mechanism.
◎ Remove any protective covering film before using the appliance.
◎ Use the supplied mounting tool to mount the appliance over aquarium.
◎ Make sure an appliance mounted on a tank is securely installed before operating it.
◎ Carefully examine the appliance after installation. It should not be plugged in if there is
water on parts not intended to be wet.
◎ For safety, the appliance must be properly connected to appropriate AC/DC adapter
and receptacle.
◎ DO NOT use an appliance for other than intended use. The use of attachments not
recommended or sold by the appliance manufacturer may cause an unsafe condition.
◎ If the appliance falls into the water, DO NOT reach for it! First unplug it and then
retrieve it.
◎ If electrical components of the appliance get wet, unplug the appliance immediately.
◎ To avoid the possibility of the appliance plug or receptacle getting wet, position
aquarium stand and tank to one side of a wall-mounted receptacle to prevent water
from dripping onto the receptacle or plug. A “drip loop," shown in the figure below,
should be arranged by the user for each cord connecting an aquarium appliance to a
receptacle. The “drip loop" is that part of the cord below the level of the receptacle, or
the connector if an extension cord is used, to prevent water traveling along the cord
and coming in contact with the receptacle. If the plug or receptacle does get wet,
DO NOT unplug the cord. Disconnect the fuse or circuit breaker that supplies power to
the appliance. Then, unplug and examine for presence of water in the receptacle.
User Manual
Warning
Drip loop