Height Adjustments
Your Sunpak 6200PG tripod is equipped with a
Geared Center Column and Elevator Crank Assembly
for precise height adjustments.
To raise or lower the Center Column, loosen the
Center Column Lock Knob (1). Turn the Elevator
Crank Assembly Knob (2) clockwise until you reach
the desired height. Retighten the Center Column
Lock Knob
to secure.
Note:
Never
release your
camera until
the Center
Column
Lock Knob is
securely
retightened.
Specifications
Maximum Height:
61 in.
Minimum Height:
23.25 in.
Folded Length:
24.5 in.
Weight:
3.3
lb.
Load
Capacity:
6.6
lb.
Leg Diameter:
0.85”
Leg
Sections:
3
Using the Pistol Grip Ball Head
For movement in any direction, simply loosen the
Pistol Grip Ball Head, by squeezing the Trigger
Control Lock. When you have reached your de-
sired position, simply release the trigger lock and
the Pistol Grip Ball Head will lock into place. The
Pistol Grip Ball Head can rotate to 360° in any
direction.
Extending the Legs
To extend, flip open the Flip Lever Leg Locks and
gently pull on the leg segment to the desired length.
To secure in position, press the leg lock lever until it is
locked. Not properly securing a leg lock may cause
the tripod leg to retract unexpectedly and result in
damage to your
camera and tri-
pod).
Leg Spikes
For indoor use,
rotate the rubber
feet to retract the
leg spikes. For
outdoor use and
surfaces where
leg movement is
a problem, rotate
the rubber feet
clockwise to expose the leg spikes. Be sure to retract
the leg spikes when used indoors or on surfaces that
can be damaged.
Tripod Components
1. Quick Release Plate
2. Quick Release Lock Lever
3. Pistol Grip Ball Head with Quick Release
4. Trigger Control Lock
5. Elevator Crank Assembly
6. Geared Center Column
7. Flip Lever Leg Lock
8. Leg
Brace
9. Rubber Foot with Retractable Spike
9
8
6
1
2
1
4
3
2
5
7
Quick Release Plate
Push forward the Locking Mechanism located just
below the Quick Release Lock Lever. Move the
Quick Release Lock Lever outward and remove
the Quick Release Plate by lifting upward. The
platform has a threaded ¼ x 20 camera mounting
screw for camera attachment.
Position the Quick Release Plate so that the cam-
era mounting screw aligns with the matching
receptacle on your camera or camcorder and
attach, using the camera mounting screw. Move
and hold open the Quick Release Lock Lever and
with the camera tilted slightly down, slide the
Quick Release Plate back into position. After doing
so, secure the Quick Release Plate using the
Quick Release Lock Lever by pressing firmly until
it stops.
Note: Do not attempt to open the
Quick Release Lock Lever without pressing
the Locking Mechanism first.
Locking
Mechanism
