APP messages to remind
3.9
：
Anti-lost distance setting 3.10
：
Vibration duration setting
Note
：
The above steps are the settings when the product is used for the first time; After the setting
is completed, as long as you do not update the APP, you do not need to set it again.
part 4
：
Pointer clock timing function
Pull out the stem outward
Dial out the arbor and the watch loses power.
Turn the arbor at this time to adjust the hour and minute
hands of the pointer.
Make it consistent with standard time.
After proofreading a good time, push the stem shaft,
energize the movement, and run the watch normally.
Part 5
：
Step function
First of all. Make sure the watch is connected to your phone's Bluetooth.
If not connected.
Please refer to
section 2 Bluetooth connection
；
1
、
In the case of Bluetooth connection
Vibrating watch can be stepped
2
、
Exit APP, and open APP again. As long as the watch does not turn off, the step
count can be accumulated.
3
、
Everyday at 2 o'clock
