8171136
04/2020
Filling and Lighting
1.
Unscrew metal flame guard from the torch vessel.
2.
Fill the torch vessel to 2 inches below the bottom rim
with torch fuel (Figure 3).
- DO NOT OVERFILL
3.
Wipe away any spilled fuel
before
lighting.
4.
Reattach the metal flame guard to the torch vessel
(Figure 4).
- DO NOT OVERTIGHTEN
5.
Allow the wick some time to absorb the torch fuel and
become saturated with fuel before lighting.
6.
Use a long lighter or long fireplace match to light the fiberglass wick (Figure 5).
Extinguishing
1.
Using the metal snuffer, carefully place the snuffer completely over the lit wick
until the flame is extinguished (Figure 6). –
DO NOT BLOW OUT
**Note:
When not in use, leave the snuffer on the torch to prevent water
contamination. If the fuel becomes contaminated with water, the wick
and fuel must be replaced and properly disposed of in accordance with
local laws and regulations.
Refilling
1.
If the torch is lit, carefully place snuffer over the flame guard to extinguish the flame.
–
DO NOT BLOW OUT
– Allow to cool for 30 minutes before handling and refilling
2.
Unscrew the metal flame guard from the vessel.
3.
Fill the torch vessel to 2 inches below the bottom rim of the vessel (Figure 3).
– DO NOT OVERFILL
4.
Wipe away any spilled fuel
before
lighting.
5.
Reattach the metal flame guard to the fuel canister. –
DO NOT OVERTIGHTEN
Figure 5
Figure 6
Figure 4
Figure 3
