Problem: Burner will not light using igniter
Please review the Helpful Tips on page 15 for common fixes to this problem.
Possible Cause 1: Electrode and burners are wet.
-
Please
contact
Net Health Shops,LLC
to request the parts.
-
Wipe dry with cloth.
Possible Cause 2: Igniter battery is dead or backwards.
-
Check that the AAA battery is inserted correctly in the igniter (see
bellow photo
) or
replace the battery. Make sure the plastic wrap on the battery has been removed.
Possible Cause 3: Igniter P i n cracked or broken - sparks a crack.
Possible Cause 1: No Gas Flow
-
Check if the LP gas tank is empty. If empty, replace and re
fill
. If the propane tank is not empty,
refer to
Problem: Sudden drop in gas flow
on the following page.
Possible Cause 2: Coupling nut and regulator not fully connected.
Possible Cause 3: Obstruction of gas
fl
ow.
Possible Cause 4: Spider webs or insect nest in the venturi.
-
Clean the venturi.
Possible Cause 5: Burner ports clogged or blocked.
-
Reference
Problem: Irregular flame pattern
on the following page.
Clean the burner ports as described there.
Problem: Burner will not light with match
Problem: The fire
table
emits a lot of black smoke when in use
Possible Cause 1: Hose from gas
fi
re table is pinched.
-
Make sure the hose is not pinched between the
fire
table and
the source of the gas.
Troubleshooting
-
Turn the coupling nut about one half to three fourths a turn, until y
ou feel a solid stop.
Do not use tools, tighten by hand only.
Venturi
-
Check for bent or kinked hose.
Possible Cause 4:
Residue on Igniter Pin.
-
Check for residue on the igniter pin or Thermocouple.
If dirty,thoroughly clean the area.
A
B
-
Check that the electronic Ignitor Cap (B) is tightly fitted to
the spring(A).If loose,please adjust the spring accordingly.
15
