Assembly Instructions
(cont.)
Step 2:
Align holes of Fire Bowl (A) with holes of stand Legs (F).
Insert Bolts through holes of Fire Bowl and Legs and attach
with Nuts (Fig 1). Attach all three (3) legs to Fire Bowl and
securely fasten bolts with screwdriver and wrench.
Step 3:
Attach four (4) Outer Ring Sections together by inserting
each end together forming ring as shown (Fig 2). Once as
-
sembled, place ring around Fire Bowl and align screw holes
of fire bowl and ring. Insert bolts through screw holes and
attach nuts (Fig 3). Hand tighten nuts only until all bolts are
in place. Securely tighten with screwdriver wrench.
Step 4:
Insert screws through underside of ring at each joint in Outer
Ring (Fig. 4). Securely fasten with screwdriver.
Step 5:
Place put on the Cooking grill and Screen if needed (Fig 5).
Step 6:
Your fireplace is now ready for outside use on a level
non-combustible surface.
Please read and follow all Warnings and
safety instructions before using.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
• Fire bowl may be cleaned with water and mild detergent.
• Do not use abrasive detergents or pads to clean surround or fire bowl.
• As with any outdoor grill, periodic maintenance is required to
return painted steel surfaces to original appearance. Remove any
rust with sandpaper or steel brush and repaint with grill paint suitable
for high-temperature surfaces. Follow manufacturer’s instructions.
General Care