ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten bolts until all components have been loosely assembled.
Page 2 / 3
89598
STEP 1
A:
1
B:
1
C:
4
2:
8
Do not fully tighten bolts until after Step 4 is complete.
STEP 2
E:
1
F:
1
G:
1
2:
4
STEP 3
H:
1
1:
1
3:
2
STEP 4
D:
1
1:
1
2:
4
• Fasten Leg (C) to Tabletop (A) and Table Shelf (B) by
hand-tightening 2x M6x40 Bolt (2).
• Repeat until all legs have been installed.
• Tighten all bolts using Hex Key (4).
• Fasten Left Arm (E) to Seat (F) by hand-tightening 2x
M6x40 Bolt (2).
• Fasten Backrest (G) to Left Arm (E) by hand-tightening
2x M6x40 Bolt (2).
Do not fully tighten bolts until after Step 4 is complete.
• Insert 2x Barrel Nut (3) into Support Beam (H). Use the
Barrel Nut Driver to align the barrel nut with the hole on
the side of the support beam.
• Insert the peg on Support Beam (H) into the left arm.
• Fasten the components by hand-tightening 1x M6x60
Bolt (1) through the arm and into the barrel nut inside
the support beam.
• Align Right Arm (D) with assembled components,
ensuring the peg in the support beam is correctly
positioned within the arm.
• Secure the arm by hand-tightening 1x M6x60 Bolt (1)
and 4x M6x40 Bolt (2), as shown.
• Tighten all bolts from Step 2, 3, and 4 using Hex Key (4).
• Repeat steps 2, 3, and 4 to assemble the second chair.
07/2020
