ASSEMBLY
Read carefully and understand assembly before beginning.
Page 2 / 3
STEP 1
A:
1
C:
1
D:
2
E:
2
STEP 3
• Insert two Barrel Nuts (E) into the underside of Seat Panel
(C). Use the Barrel Nut Driver to align the opening of the
barrel nut with the pre-drilled hole on the side of the seat.
• Align the pegs and pre-drilled holes of Seat Panel (C) with
the notches and pre-drilled holes of the Arm Panel (A).
Secure by tightening two M6x60 Bolts (D).
07/2020
88942
STEP 2
B:
1
D:
1
E:
1
• Insert one Barrel Nut (E) into the underside of the top
horizontal slat on Backrest (B). Use the Barrel Nut Driver to
align the opening of the barrel nut with the pre-drilled hole
on the side of the backrest.
• Align the pegs and pre-drilled holes of Backrest (B) with the
notches and pre-drilled holes of the Arm Panel (A). Secure
by tightening one M6x60 Bolt (D).
• Repeat Step 1 and Step 2 to connect the second arm panel.
Assemble the
bench one side
at a time.
To use the table, simply lift it
upward and place the support bar
into the grooves and flip the locking
mechanism over the support bar.
