are connected properly.
ASSEMBLY PICTURES
ASSEMBLY INSTRUCTIONS
Be careful not to spill water onto the plug of the pump.
DO NOT allow the pump to run dry!
Fig 1
Fig 2
Step 1: Place the base pedestal and the basin on a level surface. Lay the pump in the bottom of the basin,Lastly
align the basin with base pedestal, insert the basin and twist clockwise to lock in place securely. (pls refer to
the fig. 1,2,3)
Step 2: Route the water tube of the topper downwards through the assembled large basin. Connect the water tube
to the outlet nozzle of pump. Make sure the connection is tight.insert the assmbled topper and lock in place
securely. (pls refer to the fig.4,5,6)
Step 3: Fill the basin with water. Make sure the pump is completely submerged in water.
Step 4: Plug the pump power cord to the wall outlet to run the fountain.
Fig4
Fig5
Fig 3
Fig6
