ASSEMBLY INSTRUCTIONS
Step 1: Place the base pedestal (A) and the large basin (B) on a level surface.(pls refer to fig .1)
bottom of the large basin (B).And then route the pump (C)
’
s power cord through the base pedestal (A), the cord exits through
the slot in the bottom of base pedestal (A).(pls refer to the fig. 2),Lastly align the large basin (B) with base pedestal (A),
the blocks on the large basin as shown in Fig 3,insert the center pedestal(E) and twist clockwise to lock in place securely.
Step 4: Route the water tube of the fountain topper ( I ) downwards through the middle hole of the small basin (H), then align
the fountain topper ( I ) with the small basin (H). Make sure matching the slot under the fountain topper ( I ) to the the blocks
on small basin (H) as shown in Fig4. Insert the fountain topper ( I ) and twist clockwise to lock in place securely
Step 5: Route the water tube of the assembled topper (I and H) downwards through the small pedestal ( G ). Align the assembled
topper (I and H) with small pedestal ( G ), insert the assembled topper and twist clockwise to lock in place securely.pls refer to fig 5.
Step 6: Route the water tube of the assembled topper (H,I and G) downwards through the Medium Basin ( F ). Align the
assembled topper (H,I and G) with Medium Basin( F), insert the assembled topper and twist clockwise to lock in place
securely.pls refer to fig 6.
Step 7: Route the water tube of the assembled topper(I,H,G and F) downwards through the assembled Center Pedestal(E).
Allign the assembled topper (I,H,G and F) with center pedestal(E),insert the assmbled topper and twise clockwise to lock
in place securely.(pls see fig.7)
Step 8: Through the door of Center Pedestal,Connect the water tube to the outlet nozzle of pump (C). Make sure the
connection is tight.(refer to fig .8)
Step 9: Put the board (D) located at the door of the Center Pedestal(E).(see fig .9)
Step 10: Fill the large basin (B) and medium basin (F) with water. Make sure the pump (C) is completely submerged in water.
Step 11: Plug the pump power cord to the wall outlet to run the fountain.
DO NOT allow the pump to run dry!
Be careful not to spill water onto the plug of the pump.
Step 2: Route the pump (C)
’
s power cord downwards through the resin tube in large basin (B). Lay the pump (C) in the
insert the large basin (B) and twist clockwise to lock in place securely.
Step 3:Allign the center pedestal(E) with the the large basin(B),make sure matching the slot under the center pedestal (E) to
