Page 2 / 2
02/2020
LY011
ASSEMBLY
1. With the slotted end facing out, place 2x
Barrel Nut (E) into Inner Panel (B). Use
Barrel Nut Driver (G) to turn the barrel
nut so the threaded hole aligns with the
pre-drilled hole.
2. Align End Panel (C) with Inner Panel
(B) and loosely secure them by hand-
tightening 2x JCBC M6 x 50mm bolts
(D). Repeat this step until all sides are
connected.
Do not fully tighten any bolt until all bolts
have been placed.
A
E
B
F
D
C
3. Gently tighten all the bolts using Hex Key (F).
USE & CARE
SAFE USE:
Only use on a flat, level surface. Do not stand on the bench.
INSPECT:
Periodically check assembly points and tighten fittings as necessary.
CLEANING:
Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces with a soft cloth.
MAINTENANCE:
This furniture was treated with teak oil at the factory. Apply a suitable wood oil at least once a year, or
when the wood looks particularly dry. Follow application instructions as noted with the suitable wood oil (not included).
STORAGE:
Protect this item from ice and snow. Store indoors, in a dry location. Covering the unit while in storage will
help prevent dust buildup.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
Any modification or failure to follow the recommended care will void the product warranty.
4. Set Bench Seat (A) onto
the assembled boxes.
