SLATE INDOOR TABLETOP OR WALL-MOUNT WATER
FOUNTAIN WITH LED LIGHT
GSI-298
Read assembly instructions carefully and follow the care instructions. Save these instructions for future reference.
Select a smooth, level surface to place the fountain.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
SPQ50048
Page 1 / 2
01/2020
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at
888-881-4668
, by email:
, or via our contact us page at
www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
Note
: When first used, there may be air trapped in the pump. It may take several minutes for the air to escape and water begins to flow.
CONNECT
CONNECT
A
B
C
D
E
F
G
H
Ensure all parts are
accounted for before
disposing of packaging.
TABLETOP ASSEMBLY
1.
Clip the rubber end of Finger Light (B) to the underside
of Lid (A).
2.
Keeping the light cord on the backside of Fountain
Body (C), attach Lid (A) to Fountain Body (C) using 2x
Bolt (D) and 2x Washers (E).
3.
Run the light cord behind the preinstalled bracket on
the backside of the fountain body; this will prevent the
light cord from being damaged if the fountain is wall-
mounted.
4.
Connect Finger Light (B) to Pump (E).
5.
Connect Pump (E) to the water tube that is on the
backside of Fountain Body (C).
6.
Making sure the light and pump power cord are run
out the groove in the back of Basin (G), gently place
the assembled components onto the basin and secure
using 2x Bolt (D) and 2x Washers (E).
7.
Gently place the Decorative Stones (H) onto the bottom
of the fountain body.
8.
Fill the fountain with enough water to keep the pump
fully submerged during operation; approximately 1/2
gallon.
9.
Firmly connect the AC Adapter to the pump power
cable and plug it into a properly grounded GFCI outlet.
NOTE:
The water tubing is built into the fountain body. Take care when handling the water tube;
detaching the water tube from the fountain will damage the fountain and void the product warranty.
No.
Parts
Qty.
A
Lid
1
B
Finger Light
1
C
Fountain Body
1
D
Bolt
4
E
Washer
4
F
Electric Submersible Pump
1
G
Basin
1
H
Decorative Stones
1
PK
No. Optional Parts (included) Qty.
I
Wall Screw
5
J
Wall Anchor
1
K
Wall-Mount Bracket
1
L
Cord Channel
1
M
Cord Cover
2