06/2020
BGP1401-15T
Page 4 / 6
Operating Instructions
NOTE:
When using the heater for the first time, there may be a slight emission of smoke. This is normal and
will stop after a short time. The heating element is made of steel and was coated with a layer of protective oil
during production.
1.
Place the heater on a firm, level surface that is a safe distance away from wet locations and flammable objects.
2.
Plug the power cord into a proper electrical outlet (see Grounding Instructions, page 5).
3.
Press the ON/OFF switch.
4. Set the thermostat dial to the maximum temperature.
5. Once the room reaches the desired temperature, turn the thermostat dial back until heating element turns
off. The heater will cycle automatically around this present temperature. To increase temperature, turn the
thermostat knob clockwise. To lower temperature, turn the thermostat counterclockwise.
Settings
Function
Unit is off
I
ON/OFF Switch 750W
II
1500W
IMPORTANT:
Read all instructions and warnings carefully before installation and use. Failure to
follow instructions may result in a possible electric shock, injury to persons, fire hazard and will void the warranty.
Electrical outlet wiring must comply with local building codes and other applicable
regulations to reduce the risk of fire, electrical shock and injury to persons.