Thank you for choosing Sunnydaze Décor. If you have any questions,
comments or concerns please feel free to contact us by phone at:
888-881-4668
,
by email:
, or you could also email us
via our contact us page at:
www.SerenityHealth.com/contact-us/.
We stand behind our brand and the quality of the items we sell. We will send
new parts, or replace products at our discretion within the one year warranty
period. Before we can help, you will need to provide proof of purchase with the
date of purchase and photos of the defective merchandise. We will use the
photos to determine the cause of defect and for future quality control.
USER’S MANUAL
This instruction contains important information for using the product for the first time. Please keep this instruction
for later reference. They should always accompany the product in the Event of transfer a new user.
1
OVERVIEW
1.1
The solar pump is designed for fountain, pond or outdoor use. In order for the solar pump to operate, the solar
panel needs to be in direct sunlight.
1.2
This solar pump is equipped with battery pack and can be switched on and off by a touch switch on the
control housing. In evening, three built-in white LEDs will give light automatically to enhance the beauty
scene of the water jet.
2
ASSEMBLING AND USING YOUR PRODUCT
2.1
Take out all parts of the packaging. Please keep in mind that some water may splash over the rim of a bowl,
do not set up the cascade fountain on a surface which may be damaged by water.
2.2
Open the door behind the fountain.
2.3
Connect the hose from the top of the water feature to the connector on the top of the pump and place the
pump on the floor of the water chamber.
2.4
Connect the pump cable to the socket of the control housing on the rear side of the solar panel;
2.5
Connect the LED light cable to the socket of the control housing;
2.6
Fill the water feature with water ensuring the pump is fully submerged.
2.7
Close the door behind the fountain. Make sure direct sunlight shines on the solar module.
2.8
Connect the ground stake to the solar panel and place the solar panel in an area of direct sunlight.
2.9
The solar cascade fountain is now ready for use.
