Sunny TreadPad SF-T7970, User Manual

Page: 17 / 18

16
SPECIFICATIONS
Performance & Indicators Detail Parameters
Expansion Dimensions 58.2'' x 31.2'' x 41.7''
Folding Dimensions 60.2" x 31.2" x 5.5"
Running Belt 47" x 18.9"
Gross Weight 84.9LBS
Net Weight 73LBS
Maximum Load 220 LBS
Recommended Age Range 14-60 years old
Applicable Height Unlimited
Minimum Speed 0.5 mi/h
Maximum Speed 7.5 mi/h
Power Input 746W
Rated Voltage 110-120V~
Sport Mode Constant Speed Mode/Automatic Mode
IMPORTANT NOTE:
REMOTE CONTROL NOTICE
If the remote control has no response or you replace to a new one, the remote control and SUNNY
TreadPad device need to be paired.
REMOTE CONTROL PAIRING METHOD:
Restart the Sunny TreadPad. Press and hold down the mode switch button on the remote control
immediately for about 2 seconds. Hearing a "Beep" indicates that the pairing is success. During the
pairing, the remote control should be as close to the Sunny TreadPad as possible.
SAFETY LOCK FUNCTION:
Removing the Safety Key (No.67) will stop the SUNNY TreadPad immediately.Once the SUNNY
TreadPad reaches a full stop, the remote display will show
‘‘SAFE’’ and the SUNNY TreadPad will
beep.To start the SUNNY TreadPad again, insert the Safety Key (No.67) and press the start button
on the remote or APP.
ERROR CODES:
When the SUNNY TreadPad is running normally, the fault code does not display. When a fault
occurs, the remote controller displays the error code.
Error code Code meaning
When reporting an error, please cut off the power
supply for more than 10 seconds, and then restart the
power supply. If the code no longer appears, continue
to use. If the code continues to appear, please
contact the after -sales personnel.
E01 Software Overload
E02 Hardware Overload
E03 IPM too hot
E04 Low-Voltage
E05 Over-Voltage
E06 Motor phase-lack issues
E07 Motor shaft lock
E08 The motor fails
E09 Motor Overload
E10 Overload
E11 No hall signal
E12 Communication Error