Sunny shf-rb4708 Assembly Manual Download Page 3

Page: 3 / 3

218 Turnbull Canyon Rd. City of Industry, CA 91745

Bike Pedal Assembly Guide

Step Four:

Attach the spacer (which

has the alloy bushing installed) to the

other side of the pedal. Then, slide the

flat washer behind the spacer.

See

Figure 5.

Figure 5

Step Five: Connect the threaded end

of the pedal into the crank. Turn the

right pedal clockwise (or the left pedal

counter-clockwise) until it is screwed

securely into the crank.

See Figure 6.

Figure 6

Listen to our podcast at

www.sunnyhealthfitness.com/

sunny-podcast

Note:

When installing

the pedal into the

crank, screw

the right

pedal clockwise and

the left pedal counter-

clockwise. Warning:

Screwing the pedals

improperly can damage

the parts.

Summary of Contents for shf-rb4708

Page 1: ...nt Bike can be simple Many of the small parts for this recumbent bike come pre assembled which can speed up the installation process In this guide we will demonstrate how you can install the left and...

Page 2: ...and a spacer 30 which are already assembled The flat washer 39 is separate See Figure 1 Figure 1 Step Two You will also find that the simple bearing 24 is already attached to the connecting board 10...

Page 3: ...ure 5 Figure 5 Step Five Connect the threaded end of the pedal into the crank Turn the right pedal clockwise or the left pedal counter clockwise until it is screwed securely into the crank See Figure...