15
rate recovery status and check it by using the Recovery function.
9. Body Fat -
9-1. Press the BODY FAT key to enter body fat measurement.
9-2. Press MODE & SET buttons to input your personal data. Each personal data available is
described as the following:
AGE: 10 ~ 99 years HEIGHT: 100 ~ 250 cm (3
’03” ~ 8’02“) WEIGHT: 10 ~
200 kg (22 ~ 440 lb)
9-3. After all personal data has been entered, you can press the BODY FAT button and hold
pulse sensors to start the body fat testing.
9-4. It takes a few seconds to test the body fat. If you did not hold onto the sensors during the
testing procedure, the LCD will show the error sign Err after 10 second period.
9-5. After testing is finished, you will see a percentage and BMI figure (Body Mass Index)
display on the main LCD in sequence by scan mode.
BODY FAT % : Calculated from your personal data to show the value from 5%~50%.
BMI: Calculated from your personal data to show the value from 1.0~99.99.
9-6. Press any key except SET to return to the main display.
Note:
1. If training stops for 4 minutes, the screen will show room temperature, clock, and calendar
display automatically.
2. If the computer has not received any speed signal or key input for one minute, the LED backlight
will turn off automatically. Any speed signal or key input can turn on the LED backlight
automatically.
3. If the computer display is abnormal, please re-install the batteries and try again.
4. Battery Spec: 1.5V UM-3 or AA (2PCS).
