9
STEP 5
Insert the
Pin (#I)
to the
Handle Bar Supporting Post (#6)
.
Attach the
Handle Bar (#8)
to the
Handle Bar Supporting Post (#6)
using 2
Bolts (#E)
, 2
Spring Washers (#F)
, and 2
Arc Washers (#K)
. Tighten with
Wrench (#J)
.
Insert the
Computer (#46)
onto the computer bracket on
Handle Bar (#8)
. Connect the
Computer Wire (#46)
to the
Sensor Wire (#45)
.
Find the
Pedals (52& 53)
with marking L, R.
Align the
Left Pedal (#52)
at 90° angle to
Left Crank
. Gently insert the pedal onto the
crank arm, making sure it is straight and turn
counterclockwise
as tightly as you can with
your hand. Use Wrench
(#D)
to ensure it is tightened securely.
Align the
Right Pedal (#53)
at 90° angle to
Right Crank
. Gently insert the pedal onto the
crank arm, making sure it is straight and turn
clockwise
as tightly as you can with your
hand. Use Wrench
(#D)
to ensure it is tightened securely.
Assembly is now complete! Before using the bike, check that all parts are tightened and
fastened.
Warning: Do not reverse pedal on this bike. Reverse pedaling will damage the bike.
46
45
45
#K Φ8.4
Summary of Contents for SF-B2620
Page 3: ...2 EXPLODED VIEW...
Page 17: ...16...
