9
11
Figure A
5
Figure B
12
11
ADJUSTING THE HANDLEBAR
Loosen the [handlebar adjustment]
Knob (No. 11)
to raise or lower
the handlebar to the desired position. Make sure the
Knob (No. 11)
settles into the desired hole and secure it firmly by turning
clockwise
. See
Figure A
.
Loosen the
L-shaped Knob (No. 5)
to move the handlebar forward
or backward to the desired position. Once the handlebar is in the
desired position, firmly secure the
L-shaped Knob (No. 5)
by
turning
clockwise
. See
Figure B
.
ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your shoe
fits securely
in the toe clip cage. Rotate one foot to within arm’s
reach and pull the strap until the top clip cage fits your shoe
securely. Insert the strap back into the hoop of the toe clip.
Repeat this process for the other foot.
DISMOUNTING THE BIKE
WARNING! Do not dismount the bike or remove your feet from the
pedals until the pedals have stopped completely. You can stop the
flywheel at anytime by pushing down on
Tension Knob (No. 12)
.
MOVING THE BIKE
To move the bike, first ensure that the handlebar is properly
secured. If the handlebar is loose, tighten the
Knob (No. 11)
to
secure it. Next, stand at the front of the bike so that you’re directly
in front of the handlebar. Firmly grasp and hold each side of the
handlebar, place one foot on the front stabilizer and tilt the bike
towards you until the transportation wheels on the front stabilizer
touch the ground. With the wheels on the ground, you can transport
the bike to the desired location with ease.