5
STEP 1 - Base Frame
Unpack Base frame from Carton.
Attach the Front Bottom Tube (1)
to the Front Baseframe (9) using
2-Bolts (32). Then insert end cap
(31)
onto the Tube (1).
Note: While doing this step please
face the open side of the end cap
(31) upward.
Repeat for the rear bottom tube as
shown.
Attach the Cross Bar (12) to the
Front Base Frame (9) using
4 Bolts (20) and 2 Metal Support
Plate (41), 4 Flat Washers (19)
and 4-Nuts (21).
Unfold Base Frame- Front ( 9)
from Base Frame-Rear (8),
Insert Ball Pin (26) through right
side hole between the 2 frames.
Right
Left
! Wa
rning
Front
Rear
NOTE: TIGHTEN ALL BOLTS AT THIS TIME
