background image

AC.VOLTMETER 

DC.VOLTMETER

LED

 AC.Input 

                  

LED

 DC.Input

LED

 Battery Fail 

24

220

24

220

9

Caution:

  The DC Voltage Meter will change according to the Voltage of the battery being 

used, for example, 24 Volts or 48 Volts.

Figure showing the indications at the front of the unit

Figure showing the indications at the front of the unit

4. If during the self-tests the battery is found to be faulty and cannot hold a charge or less charge that
     normal the unit will show a “Battery Fail” warning.

5. If the battery charging circuit is found to be faulty, taking longer than 24 hours to charge the battery, 
      the unit will show a “Charging Fail” warning.

Shows the current level at the Input to be about 220VAC. 

Shows a battery Voltage at 24 or 48 Volts.

The indicator showing that the unit is receiving a 220VAC 
current should be on.

The indicator showing that the battery has been connected to 
the unit should be on.

The indicator showing that the battery can not provide an 
electrical charge.

To cancel the Battery Fail notification command, turn 
off and on Circuit Breaker “DC.Battery” once. 

AC.VOLTMETER 

DC.VOLTMETER

LED

 AC.Input 

                  

LED

 DC.Input

LED

 Charging Fail 

Caution:

  The DC Voltage Meter will change according to the Voltage of the battery being 

used, for example, 24 Volts or 48 Volts.

Shows the current level at the Input to be about 220VAC. 

Shows a battery Voltage at 24 or 48 Volts.

The indicator showing that the unit is receiving a 220VAC 
current should be on.

The indicator showing that the battery has been connected to 
the unit should be on.

The indicator showing that the battery has charged fail.

To cancel the Battery Fail notification command, turn 
off and on Circuit Breaker “DC.Battery” once. 

Summary of Contents for INV 220V Series












Reviews: