Sunny pumps Sunny Lily, Instruction Manual

Page: 5 / 8

Page 12 Page 5
Composants
1. Panneau solaire 2. Pompe
3. Charpente en résine 4. Flotteur
5. Têtes de la fontaine 6. Le sac d’ancrage
Assemblage et utilisation du produit
Déballez soigneusement tous les composants.
Fixez la pompe au tube à la base du panneau solaire. Veillez à
ne pas forcer.
Choisissez votre tête de fontaine et insérez-la dans la Sunny Lily
(Fontaine au Lotus).
La Sunny Lily (Fontaine au Lotus) est maintenant prête à
fonctionner.
Remarque :
Lors de la première utilisation, il peut y avoir de l’air dans la
pompe. Il faut parfois compter jusqu’à 5 minutes pour que l’air
puisse s’échapper. Vous pouvez immerger la Sunny Lily fountain
(Fontaine au Lotus) pour faciliter l’évacuation de l’air.
Afin d’éviter à la Sunny Lily fountain (Fontaine au Lotus) de flotter
à l’ombre, vous pouvez utiliser l’ancre pour l’immobiliser.
Sunny Lily
Manuel d'instructions
Cleaning and Maintenance
Pump:
If after time the pump starts to lose power or stops
working you should check for the build up of sediment or scale in
the bottom of the pump housing. Carefully take out the lily and
turn it upside down on a soft surface. Dry the solar pump
connector and disconnect.
Remove the pump from the plastic unit and open the pump
housing at its base. Remove the impeller cover and impeller and
then remove any dirt or scale which has built up. Replace the
impeller, impeller cover and replace the pump cover. Reconnect
the solar pump connector and place the unit back into the water
feature.
IMPORTANT
To ensure the seal remains water-tight twist the pump and panels
connectors together rather than merely pressing them together.
Check that the small yellow rubber "o" ring remains in its' groove
and is not pushed out when connecting. If this ring moves there
will be no water seal and the pump and panel will eventually fail.
Solar panel:
The panel should be cleaned periodically with a
soft tissue and proprietary glass cleaning solution. Regular
cleaning of the panel is advised to maintain optimum conversion
of the sun’s energy into direct current.
Trouble Shooting
If you have any problems please contact Sunny Pumps before
returning to the place of purchase. For immediate answers visit
our website
www.sunny-pumps.com
where you will find an
extensive trouble shooting section with frequently asked
questions, instant email enquiry forms and place spare part
orders.
Pump does not operate even though the solar panel is in full
sunlight
Check whether the impeller is blocked by removing the pump
cover and impeller cover. If it is, then clean the pump as detailed
above. If it is not, contact Sunny Pumps for further assistance.
Pump does operate but there is no water running through
the tube
1) Check for the build up of sediment, scale or dirt in the filter
and in the bottom of the pump housing as detailed above.
2) Check whether the pump cover and impeller cover are
attached properly. If the pump and impeller covers are not
pushed down tightly, the pump will not push water through the
fountain.
3) If fitted, check the sprinkler head is not blocked. Remove the
cap rinse the parts in water to clean before re-assembling.
Ensure the underwater connector
is water tight.
Turn upside down on a soft
surface and attach the pump unit
Tête de fontaine & Ensemble
d’ancrage
Fixez la pompe au tube
Lestez le sac d’ancrage avec
des pierres
ENGLISH
Remove pump cover
Take out impeller to clean
pump cover
impeller
impeller cover
Remove impeller cover