26
NOTE: If you are unable to resolve an issue using the troubleshooting guide above,
please contact Customer Service at [email protected]
Version 1.1
E06: Motor Abnormality
The motor wire is not
connected or the motor is
damaged.
Check motor wires to see if
the motor is connected. If
the wire has been punctured
or damaged, you will need to
replace it. If the problem is
not rectified, you may need to
replace the motor
E08: Control Board
Abnormality
The control board is not
connected.
Check the upper and middle
wires to see if the control
board is connected. If the
wire has been punctured or
damaged, you will need to
replace it. If the problem is
not rectified, you may need to
replace the control board.
E10:Motor Abnormality
The motor is damaged or a
moving part of the treadmill
is stuck and therefore the
motor is unable to rotate
properly.
Inspect moving parts of the
treadmill to ensure that they
are operating correctly.
Replace the motor if
necessary.
Summary of Contents for SF-T7718
Page 5: ...4 EXPLODED DRAWING...
Page 6: ...5...
