15
When the runner holds both hands on the pulse sensors (located on the handles), the system will
calculate the runner’s heart beat and display it in this window. The pulse range is 50-200 beats/min.
NOTE:
This data is just for reference and cannot be used for medical purposes.
TIME:
Displays the time elapsed. Display starts at 0:00 minutes: seconds. After it reaches 59:59
minutes: seconds, the display will change to 01:00 hours: minutes. Maximum display for time elapsed
is 18:00 hours: minutes. When time elapsed reaches the maximum, the treadmill will continue running.
It will start count again from 0:00.
When in Countdown Mode, it will count from the setting time to 0:00. When the clock reaches 0:00, the
treadmill will stop smoothly and display “End” then automatically reset itself after 5 seconds. Maximum
Countdown time is 99:00 minutes: seconds.
DISTANCE:
Displays the distance traveled (0.0-99.9 MILES). When the clock reaches 99.9, it will reset
to 0.00 and begin counting again from 0.0. When in Countdown Mode, it will count down from the
setting data to 0.00. When it reaches 0.00, the treadmill will stop smoothly and display “End” and
automatically reset to the initial setting after 5 seconds. When setting PROGRAMS, the speed is
programmed in intervals; PROGRAMS are from P1-P9-FAT.
CALORIES/INCLINE:
Displays the number of calories burned from 0 to 999 KCAL and the incline level
from 0-15. When the count reaches 999, it will reset and start back from 0. When in Countdown Mode,
it will count down from the desired setting to 0. Once it reaches 0, the treadmill will stop smoothly and
display “End”, then automatically reset to the initial setting after 5 seconds.
STEPS:
Counts steps that the user has walked. When it displays steps, it will count from 0 to 99999.
When it reaches 99999, it will count again from 0.
MATRIX:
The matrix window will display a 0.25 MILES running track. Once you finish running the lap,
the treadmill will beep and show the number of laps you’ve completed.
FUNCTION KEYS:
PROGRAM:
Press the PROGRAM button to set your desired interval setting. Programs are displayed
as P1-P9 and FAT and the various intervals are shown on the face of the treadmill. P1-P9 are preset
programs.
MODE:
When stopped, press this button to select a Countdown Mode.
10:00 MINS is the set Countdown for TIME.
1.0 MILE is the set Countdown for DISTANCE.
50 KCAL is the set Countdown for CALORIES.
When setting each Countdown Mode, you can press the speed +/– buttons to increase or decrease
from the set data. Press START to start the treadmill.
START:
To start the treadmill, insert the magnet end of the safety key into the console and then press
the START button. This treadmill requires the safety key in order to start. 0.5 MPH is the default start
speed.
STOP/PAUSE:
This button has functions of STOP and PAUSE. During running, press this button, the
treadmill will pause, and all data will be kept, window will show “PAU”; Under pause mode, if you press
PROGRAMS
Initial
Default Value
Set Range
Display Range
TIME (MIN:SECOND)
0:00
10:00
5:00-99:00
0:00
－
99:00
INCLINE (SECTION)
0
0
0-15
0-15
SPEED (MPH)
0.5
0.5
0.5-9
0.5-9
DISTANCE (MILE)
0.00
1.00
0.50-99.9
0.00
－
99.9
PULSE (BPM)
P
N/A
N/A
50-200
CALORIE (KCAL)
0
50
10-999
0
－
999
Summary of Contents for SF-T7705
Page 23: ...22 EXPLODED DIAGRAM...
Page 26: ......
