5
ASSEMBLY INSTRUCTIONS
STEP 1:
Put the 2
Plastic End Pieces
(No. 13)
onto the rear tubes on
the
Main Frame (No. 1)
. Make
sure the ball pins pop into the
holes on the bottom of the rear
tubes.
(1)
(2)
STEP 2:
(1) Insert the meter wire into the
hole at the top of the
Handlebar
(No. 32)
.
(2) Thread the meter wire
through the
Handlebar (No. 32)
post. Insert the
Meter (No. 9)
onto the
Handlebar (No. 32)
.
(3) Pull the
Knob (No. 35)
and
lower the
Handlebar (No. 32)
post and the meter wire into
Handlebar Tube A (No. 30)
.
(4) Set at desired height.
Release the
Knob (No. 35)
and
make sure the pin pops into one
of the holes on the
Handlebar
(No. 32)
post.
(3)
(4)