8
HOW TO FILL AND EMPTY THE TANK
1. Remove the
Plug (No. 52)
from the
Upper Tank Cover (No. 42)
.
2. To fill the tank with water, refer to Fig. A. Insert the
Funnel (No. 121)
into the tank, then use a cup
or a bucket
and
Pumping Siphon (No. 120)
to fill the tank. Use the water level gauge on the front
of the tank to measure water level in the tank.
3. To empty the tank, refer to Fig. B. Place a bucket next to the rower and use the
Pumping Siphon
(No. 120)
to pump out the water from the tank into the bucket.
4. Insert the
Plug (No. 52)
back
into the
Upper Tank Cover (No. 42)
. Wipe off excess water around
the area.
NOTE:
•
Fill the tank only with tap water. Add 1 water purification tablet (1 packet is included). Never use
pool chlorine or chlorine bleach. This will damage the tank and void the warranty.
•
Add a water purification tablet every 6 months or as needed. If water remains cloudy, replace the
water in the tank.
•
Do not consume the tank water. Dispose the water after pumping it out from the tank.
WATER LEVEL
•
The water level gauge is on the front of the tank. Please fill the water until it reaches the limit
(white line). The water level should not be higher or lower than this limit. Never fill over this limit.
Filling the tank over the limit will void the warranty.
Summary of Contents for SF-RW522017BLK
