Sunny Health & Fitness SF-RB925 Manual Download Page 2

 

2

IMPORTANT SAFETY INFORMATION 

 

1. Before you start your exercise, read the manual carefully and also keep this manual for future 
reference. 
 
2. Before beginning any exercise program you should consult your doctor first to determine if 
you have any medical or physical conditions that could put your health and safety at risk. Your 
doctor’s advice is essential if you are taking medication that affects your heart rate, blood 
pressure or cholesterol level. 
 
3. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. 
Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, 
irregular heartbeat, extreme shortness of breath, lightheadedness, dizziness or feelings of 
nausea. If you do experience any of these symptoms you should consult your doctor before 
continuing with your exercise program. 
 
4. Do not operate this equipment if it is not assembled correctly. Also you should inspect your 
machine periodically to ensure your machine is still in good condition. It is your responsibility to 
ensure that all users of the equipment are informed of all warnings and precautions.   
 
5. Keep children and pets away from the equipment. The equipment is designed for adult use                     
only. The equipment is not suitable for therapeutic use.   
 
6. Before using the machine, please check the nuts and bolts are securely tightened. 
 
7. Always use the equipment as specified. If any defective components have been   
found during assembly or while checking the equipment; or you hear any unusual noises from 
the equipment during use, stop immediately. Do not use the equipment until the problem has 
been rectified.   
 
8. Wear appropriate workout clothing while exercising. Do not wear robes or other clothing   
that could become caught in the machine. Running or aerobic shoes are also required  
while using the machine.   
 

9. Use the equipment on a flat, and level surface. Do not use the machine near water or         
outdoors. 

 

10. Keep hands away from all moving parts. While lifting or moving the equipment, always do so               

carefully. 

 

11. This equipment is designed for indoor and home use only, not intended for commercial use. 

 

12. Maximum weight of user: 220Lbs. 

Summary of Contents for SF-RB925










Reviews: