4
ASSEMBLY INSTRUCTIONS
STEP: 1
Turn the
Pop-Pin Knob (No. 16)
counter-clockwise to loosen it, then pull it out and
unfold the
Main Frame (No. 7)
. Reinsert and tighten the
Pop-Pin Knob (No. 16)
to
secure the
Main Frame (No. 7)
in place.
Attach the
Front
and
Rear Stabilizers (No. 15
and
No. 13)
to the
Main Frame (No. 7)
using 2
Screws (No. 14)
, 2
Washers (No. 12)
and 2
Nuts (No. 11)
. Tighten and secure
with
Spanner (B)
.
STEP: 2
Attach the
Seat (No. 3)
to the
Seat Support Tube (No. 4)
using 3
Washers (No. 5)
and
3
Nuts (No. 6)
tighten and secure with
Spanner (B)
. (The
Seat (No. 3)
contains three
pre-installed threads beneath).
Insert the
Seat Support Tube (No. 4)
into the
Main Frame (No. 7-2)
. Set the seat to
the desired height using the pre-set holes along the right side of the seat support tube.
Once set, insert the
Seat Knob (No. 8)
into the hole located on the
Main Frame (No. 7-
2)
(see drawing below), to secure the
Seat Support Tube (No. 4)
in place.
Summary of Contents for SF-B1411
Page 3: ...2 EXPLODED DRAWING ...
