16
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE TENSION OF THE ELLIPTICAL
CLIMBER
Adjust the tension of the elliptical climber by rotating the
Tension Control Knob (No. C06)
clockwise
to increase
the level of resistance. Rotate the
Tension Control Knob
(No. C06)
counter-clockwise
to decrease the level of
resistance.
Tension levels are set at Level 1 being the lowest and
Level 8 being the highest.
ADJUSTING THE BALANCE OF THE ELLIPTICAL
CLIMBER
If you find that the climber is unbalanced and causes
excessive movement when in use, you can adjust the
elliptical climber balance. Use the
Spanner (No. B19)
to
loosen the
Nut (No. D37)
. Adjust the
Foot Pad (No. C23)
on the
Front
&
Rear Stabilizers (No. A11
&
A12)
of each
side if you need. After adjusting, tighten and secure with
the
Spanner (No. B19)
.
MOVING THE ELLIPTICAL CLIMBER
To move the elliptical climber, hold the
Upright Post (No.
A02)
and tilt it until the movable wheels located on the
Transportation Wheel (No. C24)
of
the
Front Stabilizer
(No. A11)
touch the ground. With the wheels on the
ground, you can transport it to the desired location with
ease.
CLEANING
The elliptical climber can be cleaned with a soft, clean, and damp cloth. Do not use abrasives or
solvents on plastic parts. Please wipe your perspiration off the elliptical climber after each use. Be
careful not to get excessive moisture on the meter display panel as this might cause an electrical
hazard or meter failure.
Please keep the elliptical climber, especially the computer, out of direct sunlight to prevent screen
damage.
Please inspect all assembly bolts and pedals on the machine for proper tightness every week.
STORAGE
Store the elliptical climber in a clean and dry environment away from children.
Summary of Contents for PRO CARDIO CLIMBER
Page 4: ...3 EXPLODED DIAGRAM ...
Page 44: ...43 ...
