8
ADJUSTING THE BALANCE
Before using the product, check the balance of the product to ensure that it is safe for use. Put the product
on a flat, even surface. If you find that the product is slightly uneven, you may adjust the product to
compensate for uneven ground. To do so, rotate the end caps on the stabilizers until they're even with the
surface. Please refer to the drawing below.
ADJUSTING THE BENCH ANGLE
Turn knob to loosen. Pull knob to release, set
bench at the desired angle. Reinsert the knob and turn to tighten.
Keep hands clear of moving parts to avoid injury.
Please adjust the end caps if
there is a slight imbalance
problem caused by uneven ground.
ADJUSTMENT GUIDE
