ASSEMBLY INSTRUCTIONS
1
15
STEP 1:
Remove
2
Socket Pan Head Bolts (No. 31)
, 4
Socket Pan Head Screws (No. 32)
,
8
Flat
Washers (No. 28)
and 2
Nylon Nuts (No. 29)
from
Stabilizer Tubes (No. 3)
with
Allen
Wrench (No. 48)
and
Wrench (No. 46).
Attach
Stabilizer Tubes (No. 3)
to
Bottom
Frame (No. 2)
with 2
Socket Pan Head Bolts
(No. 31)
, 4
Socket Pan Head Screws (No. 32)
,
8
Flat Washers (No. 28)
and 2
Nylon Nuts
(No. 29)
. Tighten and secure with
Allen
Wrench (No. 48)
and
Wrench (No. 46)
.
Note:
to prevent the injury caused by the
machine falling down, please ask someone to
hold the machine when assembling.
STEP 2:
Grasp the rear end of
Main Frame (No. 1)
with
one hand then use your foot to press down the
Cylinder (No. 15)
and then press down on the
Main Frame (No. 1)
. Once the
Main Frame
(No. 1)
has been pushed down it will
automatically continue to steadily lower itself
until it reaches level ground.
3
3
28
31
28 31
28
32
29
28
32
2
#31 M8x45x20 2PCS
#32 M8x15 4PCS
#28 φ8.2xφ16.2x1.5 8PCS
#48 S5 1PC
#46 S13-14 1PC
#29 M8 2PCS
5