INSTALLATION & INSTRUCTION MANUAL - INVERTER SERIES
–
I9, I12, I17, I19 - SWIMMING POOL HEAT PUMP UNIT
sunloverheating.com.au
4
1. PREFACE
WARNING
•
The appliance shall be stored in a room without continuously operating ignition sources (for example
open flames, an Operating gas appliance or an operating electric heater.) If any leakage of the gas ,
fire can be occur.
•
Do not pierce or burn.
•
Be aware that refrigerants may not contain an odour, Appliance shall be
installed, operated and stored in a room with a floor area larger than 30
㎡
.
•
Make sure that there is circuit breaker for the unit, lack of circuit breaker can
lead to electrical shock or fire.
•
The heat pump located inside the unit is equipped with an over-load protection
system. It does not allow for the unit to start for at least 3 minutes from a previous stoppage.
•
Caution: Single wall heat exchanger, not suitable for potable water connection.
Directive 2002/96/EC (WEEE)
The symbol depicting a crossed-out waste bin that is underneath the appliance indicates that this product, at
the end of its useful life, must be handled separately from domestic waste, must be taken to a recycling centre
for electric and electronic devices or handed back to the dealer when purchasing an equivalent appliance.
Directive 2002/95/EC (RoHs)
This product is compliant with directive 2002/95/EC (RoHs) concerning restrictions for the use of harmful
substances in electric and electronic devices.
