Mobile welding pen with foot pedal(MT)
: The mobile welding pen effectively
extends your welding area, and this design is popular among electric hobbyist,
because they can build large lithium battery packs for their e-bikes or other
projects.
Welding range
: 0.05~0.2mm for nickel plated steel, 0.05~0.15mm for pure nickel
strip;
Preparation steps
:
1. Insert mobile welding pen.(In this case, do not fit welding head with
copper welding rods.)
2. Plug in foot pedal.
3. Turn on the main power button, and then the welding power switch.
4. Weld your batteries with mobile welding pen along with the foot pedal.
Mobile welding pen without foot pedal(AT)
: In this mode, you need to unplug
the foot pedal first. Once the welding pen attaches nickel strip, the welding pen
will release the energy and weld automatically, you just need to give a little
pressure to the pen just like you are writing.
Welding range
: 0.05~0.2mm for nickel plated steel, 0.05~0.15mm for pure nickel
strip;
Preparation steps
:
1. Insert mobile welding pen. (In this case, do not fit welding head with
copper welding rods.)
2. Turn on the main power switch, and then turn on the welding power
button.
3. Adjust the pulse quantity and welding current level to make the spots
more reliable and elegant.
4. Weld your batteries with mobile welding pen.
(
Attention
: In all the steps mentioned above, please make sure that the
copper welding rods of the fixed head and the welding pins of the mobile
welding pen are not in contact with each other to avoid short circuit. When
users need to adjust the distance between welding pins on mobile welding
pen or distance between copper welding rods of fixed head, please turn off
the welder first, do not adjust the distance when the welder is on.)
In general, there are two methods to improve the output power of spot
welding: adjusting welding current level through current knob or adjusting
pulse quantity. You may need to play with them a bit to get the best
combination for your specific use.
How is the pressure knob works?
The pressure knob regulates the pressure between copper welding rods and
nickel strip. Generally speaking, the thinner the nickel strip, the smaller the
pressure. A proper pressure between nickel strip and welding rods can also
make the spots more elegant.
