Fig.6-2:
Insert hook (M) into big
top connector (I), then insert
long middle beam (E4) and
short middle beam (F3) into
pipe of big top connector (I).
Fig.7:
Attach middle beam down
tube (E3) to middle beam down
connector (G) by screw (FF), flat
washer (BB) and nut (EE).
Fig.8:
Insert cant beam (D1)
into cant beam down tube
(H1).
Fig.10:
Attach cant beam down
tube (H1) to floor nail slice of post
(A1) by screw (FF),flat washer
(BB) and nut (EE).
Fig.9:
Insert one side of cant
beam (D1) into pipe of big top
connector (I).
Fig.11:
Insert small top cant
beam (J) into small top
connector (K).
Fig.12:
Put small canopy (R)
on small top, then attach four
corners of small canopy to
small top cant beam (J).
Fig.13:
Attach finial (L) to
small top connector (K).
Fig.6-1:
Insert long middle beam
(E4) into middle beam down tube
(E3). Insert F3 into E3.
