Care &Maintenance
Before using, clean the table completely with a soft dry towel. Do not place your table in wet conditions where
there is a risk of rust developing. When not in use, wipe free of any dirt or loose objects, wash with a mild solution
of soap and water; rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. When
not in use, store in a cool, dry location away from sunlight.
Limited Warranty:
Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and
materials for a period of 1 year from the date of purchase, provided the item was factory-sealed at the time of
purchase and is maintained with care and used only for personal, residential purposes. Should any manufacturing
defect arise within this warranty period, Sunjoy Industries will repair or replace (at our option) any defective
merchandise upon proof of purchase; however, transportation and delivery costs, as well as payments to a third
party for assembly or disassembly of the item, remain the responsibility of the purchaser. A purchaser of an "open
box," previously-returned, or "clearance" item, as well as original purchasers outside of the warranty period, may
obtain replacement parts from Sunjoy Industries for products in current production, at nominal cost.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature,
vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof
of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is
non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and
color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations
on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights,
and you may also have other rights, which vary from state to state.
Step 3:
Attach Table Top B onto side panels C/D,
tighten with bolts CC, flat washer AA, split
washer BB. (Tool needed: Wrench GG)
Step 4:
Place Umbrella Cap A onto Table Top B
