8
Step2:
(AA)
x 48
M6 x 15 Bolt
(BB)
x 72
M6 Washer
(DD)
x 24
M6x16 Bolt
(FF)
x 16
Stake Φ8x180
Fig.3: Attach Base Protector (H) to Post 1&2 (E&F), fix Post Base (G) to Post (E&F) by using Bolt (DD) and Washer (BB).
Fig.5: Insert Guideway Bar (N) into Small Connector (L) that is on the top of Post 1&2(E&F), then fix them by Bolt (AA) and Washer (BB).
Fig.6: Fix the bottom of Guideway Bar (N) to Small Connector (L) that is on Post 1&2 (E&F) by Bolt (AA) and Washer (BB).
Fig.7: Fix Post 2 (F) to Corner Connector (C) by Bolt (AA), Spring Washer (EE) and Washer (BB). The same way for Post 1 (E).
Fig.4: Put Small Connector (L) onto Guideway Bar (N) through the bottom of Guideway Bar (N).
(EE)
x 40
M6 Spring Washer
Do not completely tighten screws until all screws are in place.
Summary of Contents for Threshold L-PG080PST-F6
Page 3: ...3 Tools needed ...
