Production Number: XXXXXXXX
Made In China
2 / 6
PARTS LIST
Label
Description
QTY
Image
A
Umbrella Shade
1
B
Lower Pole
1
C
Solar Panel
1
ASSEMBLY STEPS
Step 1:
Insert the plug into the socket under the solar
panel(C).
C
A
Fig. 1
C
Fi g . 2
Step 2:
Put the solar panel on the top of umbrella and hide
the plug and wire inside the groove at the top of umbrella.
Then turn the solar panel clockwise. Do not over tighten.
Please remove the plastic film on the solar panel.
*This protective plastic film is to prevent damage
during shipment.
Fig. 3
B
A
Step 3:
To assemble the two pole pieces together:
Insert the bottom pole into the upper pole while
pressing the snap button on the bottom pole until the
snap button locks into position.
Fi g. 4
Step 4:
We recommend that you stand and secure the
umbrella to an umbrella base (not included). Secure the
umbrella pole firmly by tightening the locking nut.
* Reverse the set-up steps above to take down the umbrella.
