Hardware Pack 2
Fig.4: Connect the Upper Oblique Beam (F) with the Middle Oblique Beam (G)
．
Fig.5: Connect the Middle Oblique Beam (G) with the Bottom Oblique Beam (H).
Fig.6: Insert the assembled Upper Oblique Beam (F) into the corresponding tube of the Big Roof
Connector (N).
Fig.7: Insert the assembled Bottom Oblique Beam(H) into the Corner Panel(A).
Fig.8: Connect the Long Middle Beam (I) with the Tube under Long Middle Beam (J); Connect
the Short Middle Beam (K) with the Tube under Short Middle Beam (L).
Fig.9: Insert the assembled Long Middle Beam (I) into the Big Roof Connector (N), so does the Short
Middle Beam (K), then assemble the Hook (P) in the Big Roof Connector (N).
Fig.10: Assemble the Tube under Long & Short Middle Beam (J & L) on the Cross Beam with Knob (U).
Fig.11: Connect the Small Roof Slant Beam(M) with the Small Roof Connector (O), place the
Big Canopy (R) to the big roof and do not spread it.
Fig.12: Attach the Small Canopy (S) to the small roof along the Small Roof Slant Beam (M), Aligning
the corners and stretching it to fit.
Fig.13: Assemble the Finial (V) on the small roof.
Fig.14: Assemble the small roof on the big roof by the support bar of the Small Roof Slant Beam.
