`
Fig.10:
Insert another end of the big top beam (L) to the corner bar connector (H1 & H2).
Fig.11:
Connect another end of short (long) side beam M (N) to the middle beam connector (J) by screw (EE),
washer (BB) and nut (FF).
Fig.12:
Screw the hook (Z) to the small top connector (T). Insert the small top beam (U) to the small top connector
(T). Attach the small canopy (V) to the small top along the small top beam (U), aligning the corners and stretching
it to fit.
Fig.13:
Place the large canopy (W) to the roof; do not spread it. Attach the assembled small top to the big top
frame.
HH
Part NO.
Description
QTY
CS NO.
Image
Φ
6x260 peg
GG
Plastic ring
52 PCS
16 PCS P12405A01001
P90701A07007
Hardware Pack 3
Fig.7:
Connect the corner bar connector (H1 & H2) to the top of post (A) with screw (AA) and washer (BB).
Fig.8:
Insert the big top frame long beam (R) and the big top frame short beam (S) to the big top frame connector
(Q1 & Q2).
Fig.9:
Insert the big top beam (L), short side beam (M) and long side beam (N) to assembled big top frame.
